• For adding or replacing cage & rack mounts • Inserts are 10 to a bag
What seatpost collar size do you need? What's your seatpost size? Find out with Sunlite's Digital Caliper. Since it's accurate to .02mm and measures from 0-150mm wide, you can measure anything on your bike from spokes to your dropout spacing. It registers in inches or millimeters and is made from durable stainless steel. It even comes in its own protective carrying case.
Sunlite's Fork Crown Race Setting Tool works on 1 and 1 1/8-inch steerer tubes. It sets the headset race perfectly on your fork without damaging it. Slip your race on the steerer, place the aluminum setting ring on top, slide the shaft over the steerer and give it a tap with a mallet. Viola! Your fork is ready to go.
- 9-piece tool kit in a convenient roll-up tool wrap - Includes the tools needed to do most basic bicycle repairs Kit includes: - 1 x heavy-duty nylon tool wrap - 1 x patch kit with glue, scuffer, and tube patches - 1 x 6-inch adjustable wrench - 1 x 3-way Y-wrench with 8,9, and 10mm sockets - 1 x Folding multi tool with 2/2.5/3/4/5/6/8mm hex keys, PH2 and FL5 screw drivers - 1 x Multi-size spoke wrench - 1 x Chain tool - 2 x Nylon tire levers
Sunlite's 30-32/36-40 Headset Wrench is a double-ended wrench that fits threaded headsets. Having 4 tools in one is really convenient!
- Spring-loaded plier for single handed cog removal - Fits 1/2 x 3/32" cogs between 10 and 19 teeth - Non slip handle
Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Attach it it you a half-inch ratchet or torque wench and go to work.
- Pro quality SIS cable cutter with integrated housing reamer - Durable chromoly construction with large comfortable ergonomic handles
- Mini torque wrench preset to 5 newton meters - Includes 3, 4, 5, and 6mm hex bits, T20 and T25 torx bits
- For removal of 16-notch Shimano outboard bottom brackets - Compatible with 1/2" drive socket and torque wrenches - Hardened steel construction
Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. This tool uses wrench flats.
• 14/15mm • 8mm Hex
Be prepared out there with Sunlite's 8 Function Multi Tool. You've got 2, 2.5, 3, 4, 5 and 6mm Allen wrenches as well as a flat and Phillips screwdriver. It's small, it's light and it doesn't take up much room.
- Slides into a hydraulic disc brake caliper to reset the piston when replacing pads, aligning pads, and performing other service procedures - Prevents scratching and damage to pistons
- Allen wrench set with ball ends for ease of use - Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm sizes
- Hardened & nickel plated - Fits Shimano, SRAM GXP, Truvativ, RaceFace, FSA, and Campagnolo - Dual-compound handle
Be prepared out there with Sunlite's 9 Function Multi Tool. You've got 2, 2.5, 3, 4, 5 and 6mm Allen wrenches, a Torx 25 for your rotors as well as a flat and Phillips screwdriver. It's small, it's light and it barely takes up any room.
- 14mm Socket wrench - 8mm Hex wrench - Hardened steel construction - Dual-compound grip
• HD hardened steel construction
Sunlite's Mini Chain Tool is small and light, so it fits in tight places and packs easily (that's a hint that you should carry it on every ride.) But don't let its small stature fool you: you get plenty of leverage thanks to wide handles.
- 14mm socket for removing axle bolt - Rotating tip and non slip handle for ease of use - Chromoly construction
The Sunlite Shimano Freewheel Remover w/Guide fits the lockring on Shimano cassettes. Its hardened steel construction will last longer than your cassettes.
Sunlite's Sport Pedal Wrench is a double-ended wrench that fits any pedal size. The long handle gives you leverage, the rubber handle gives you a solid grip and the offset protects your knuckles.
- 2 tools in one: Chain Whip/Pedal Wrench - Sprocket remover chain whip with built in lockring spanner - Rubber-coated non-slip handle
- True universal chain breaker works with up to 11-speed chains - Comfortable ergonomic grip - Includes one replacement pin
- 2-in-1 trailside disc brake repair tool - Features disc brake truing slots as well as a piston press/spreader in one convenient tool - Sandblasted chrome finish resists corrosion
- Chromoly construction - Used for truing most disc brake rotors - Non-slip handle - Multiple angles of use
Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way hex. Sunlite's Hex Wrench has 4, 5, and 6mm hex wrenches. Then, 8, 10, and 12mm sockets fit over the hex ends making 6 tools in one! The rubber handle lets you wrench all day in comfort, too.
• Holds 0.9mm, 1.1mm, 1.3mm, 1.8mm aero bladed spokes
- Removes square, ISIS, and Octalink style cranks - Recessed threads won't damage crank threads
Page 1 of 2 Next page