Accessories/Parts

$29.99
Allen's Adapter Bar allows full suspension bikes and non-conventional frames to be used on your Allen rack. An internal spring mechanism maintains constant tension to keep your frame secure. Plus, the plastic coating protects your bicycle's finish.

$27.99
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized.
- Holds front wheel in place
- Rigid steel stays with 9mm dropouts
- Mounts to any flat surface

$29.99
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately).
- Pre-aligned positioning for easier fork installation
- Special anti-rust treatment with tough powder-coat finish
- Features patented Delta locking lever
- Base Dimensions 4" x 1.5" x 1.75"
- Mounting Holes 3" center to center
- Ultra-rigid 9mm skewer
- Carry your front wheel with a Delta Wheel Hitch (sold separately)

$29.99
- For carrying unique frames on hang-on type car racks
- Quick release clamp adjusts to fit between stem and seatpost
- Rubberized hooks protect bikes finish

$33.99
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

$19.99
For transporting or storing your bike, Hollywood's Fork Block is the accessory you need. With a stout 9mm-diameter skewer that firmly grips your fork and a heavy-duty base that bolts to any solid surface, you can have a rack anywhere you need one.

$24.99
The Hollywood T975 is a 15mm thru-axle bike mount that bolts to any solid surface. Simply loosen your quick release lever and remove the axle from the front wheel. Place the bike's fork dropouts onto the 975 bike mount and slide the axle back through both the fork dropouts and the 975 bike mount. Tighten and secure.
$24.99
Hollywood's Single Bike Parking Stand is easy to assemble and simple to use. Roll your bike’s rear wheel into the stand and the bike is now fully supported. It fits most tire sizes including 29’rs and cruisers.
- Max tire width: 2.5 inches
- Powder-coated steel tubing
- Assembles easily in just minutes
- Features adjustable legs for uneven floors

$34.99
Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.

$34.99
The 1-1/4" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

$34.99
The 2" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

$34.99
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

$69.99
Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide

$89.99
The Sport Rider Trike Adapter fits most recumbent trikes (NOT suitable for adult/industrial style trikes). Track width up to 32" with standard Sport Rider wheel holders, or 36" track width using extra wide Sport Rider wheel holders.

$99.99
The new Hollywood Racks Truck Pad is designed to carry up to four bikes in the back of a pickup truck. At 53 inches, it will cover the tailgate of a compact truck and other larger pickups.

$114.99
Make your home, business, or property really bike friendly with the Bike Valet. This sturdy parking stand holds up to 6 bikes and sports a tough indoor/outdoor textured finish.
• 1-inch x 16 gauge steel side rails and horizontal tubes
• ¾-inch x 16 gauge steel vertical tubes
• Powder-coated finish
• Double-sided configuration
• Can be bolted down
$249.99
Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever.
- Weight: 45 lbs
- Capacity: 2 bikes, max 45 lbs per bike
- Fits models HR1450, HR145R, and HRT220
- Space between bikes: 10 inches
- Not to be used on any trailer, fifth wheel, or towed vehicle

$34.98 - $59.98
- Adapters for mounting suspension forks to most auto bike racks
- Solution to thru-axle issues or clearance problems between disc brakes & trays

$10.00
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

$13.00
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$19.00 - $29.00
We've all had a friend like The Dirtbag at some point in our lives.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$19.00
We've all had a friend like The Dirtbag at some point in our lives.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$19.00
We've all had a friend like The Dirtbag at some point in our lives.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.

$29.00
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

$35.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack.
Features
- Adapts oddly shaped frames for use with hanging style racks
- Spring loaded for a solid fit
- Coated hooks (prevent wear on your bike)
- Installs in seconds
- Fits most bikes

$49.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

$49.00 - $59.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

$295.00
Love riding but also love post-ride tailgating? Now you can have both. The Pivot allows your bike rack (up to a loaded NV 2.0 4-Bike) to effortlessly swing away, providing ample clearance for tailgates, rear gates or just increasing your hatchback access.
Features
- 90-degree swing away
- Provides clearance for a tailgate or rear doors
- Locking, anti-rattle hitch pin
Specs
- 2" Hitch Only
- Weight Limit: 250 lbs. / 114kg
- Weight: 46 lbs.
$329.00
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to.
- Clearance for tailgates or rear doors
- Proprietary FLATLOCK cam system
- Locking hitch pin
- Lifetime Warranty
- 2” Hitch Only
- Quick-release 90 or 120 degree swing away
- Driver-Side or Passenger-Side Swing Options
- Compatible with fully loaded 4-bike NV 2.0
- Load up to a maximum of 250lbs

$449.00
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front.
- Adjustable front tire cradle system
- Fully integrated cable locks
- Trail Doc compatible
- Front tire ratchet design with an intuitive release
- Rear tire strap features a co-molded strap to protect wheels
- Premium matte powder coat
- Compatible with 2-inch NV Base 2.0
- Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each
- Holds wheelbases up to 48-inch and tires as large as 4.8-inch
- Quick change from 2 to 4 bikes

$489.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front.
- Adjustable front tire cradle system
- Fully integrated cable locks
- Trail Doc compatible
- Front tire ratchet design with an intuitive release
- Rear tire strap features a co-molded strap to protect wheels
- Premium gloss metallic powder with water transferred logos
- Compatible with 2” NV 2.0
- Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each
- Holds wheelbases up to 48” and tires as large as 4.8”
- Quick change from 2 to 4 bikes

$40.00
Not a fair weather rider? Neither are we. Protect your ride from mud with the new Race Face team seat covers. Built as a quick fix barrier between rider and seat, the 96% nylon, 4% spandex fiber content means this cover is built for abuse. A waterproof membrane and DWR finish ensure your seat stays dry.

$149.99 - $169.99
- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency
- Micro-brushed inner lining protects your tailgate from rub and wear marks
- Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling
- Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place
- When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system
- Grommet system offers the ability to lock bikes
- Storage pocket
- Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

$6.95
Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.

$9.95
Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.

$18.95 - $79.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
$19.95
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.

$24.95
The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.

$34.95
RockyMounts' Frame Bar is a spring loaded telescoping tube used to adapt ladies', kids', and full suspension bikes to top-tube carrier hitch racks.

$49.95
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

$49.95
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.

$54.95
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

$69.95
The RockyMounts LoBall Track is a hardcore bike rack solution for channel systems commonly found in Toyota, Nissan, Chevy, and GMC truck beds. It includes locking quick release, lock core, and two keys.

$69.99
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.

$89.95
The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.

$169.95
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

$199.95
Creating the world's most aerodynamic and colorful bike racks since 1993, we've leveraged our knowledge of the bike rack industry and it's ever changing technologies to create the world's most versatile and elegant platform hitch rack. Perfect for the bike enthusiast or recreational rider, the SplitRail Single Add On pairs with the 2" SplitRail to accommodate 3 or 4 bikes. Each add on is engineered with 4" of side-to-side adjustment, which makes fitting anything from kids to adult bikes simple and easy. An integrated cable lock secures bike to rack (lock core and keys included). 40lb max weight per bike with add on(s). 3-bike configuration: 12" spacing (on center) between bikes. 4-Bike configuration: 12" spacing (on center) between bikes one and two; 9" spacing (on center) between bikes two, three, and four. RockyMounts stands by its products by offering a lifetime warranty.
- Compatible with 2" SplitRail (SKU 1140, sold separately) to expand carrying capacity to 3 bikes (requires oneAdd On) or 4 bikes (requires two Add Ons)
- Lightweight chromoly and aluminum construction
- Fits bikes with 20-29" wheels and "Plus" size tires. 48" max wheelbase
- 4" of side-to-side tray adjustment for simple and easy loading and unloading of bicycles
- Integrated cable lock secures bike to rack
- Due to weight restrictions of 1.25" hitches, the SplitRail Single Add on can only be used with the 2" SplitRail
- SplitRail rated 5 out of 5 stars on MTBR (August 2016)
- RockyMounts offers a lifetime warranty on all of our products
- Want to match keys to your existing SplitRail or any other RockyMounts products? Simply add your key number (ex. E144) in the "comments" field at checkout

$10.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

$11.99
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.

$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

$15.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Page 1 of 4
Next page