Brakes/Levers/Pads

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

• Replacement nut for recessed caliper brakes

Brass compression olive for Hope hydraulic disc brakes.

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

• Compatible with most side pull and center pull brakes • All weather compound

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

Replacement banjo bolt for Hayes hydraulic Brake systems.

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

• Compatible with most side and center pull brakes • Excellent for BMX and freestyle • Hex nut type • All weather compound

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

-Molded threaded BMX caliper brake pads

-Molded threaded u-brake pads

- Replacement barrel adjuster for 105 5800 brakes

Brass hose insert for Hope hydraulic disc brakes.

- 40mm long brake blocks with hardware to fit basic caliper brakes

- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders

Origin-8's Disc Rotor Bolts are made of a corrosion-resistant steel, have Torx heads and come in a complete set of 6. They're perfect for attaching your disc brake rotor to the hub.

• All weather compound • Fits most 50mm road caliper brakes • Available in Clear or Black models

- Standard replacement cantilever/v-brake bosses

•Compatible with most caliper style brakes •Designed for water clearing

•55mm cartridge inserts •Compatible with most road caliper brake pad holders •All weather performance

-Single compound cartridge road brake pad inserts

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.