Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Campagnolo Chorus EPS Braze-On Front Derailleur
$400.00
Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g
FSA Front Derailleur Shim
$3.99
- Correct fitment of larger 31.8Mm front derailleur to 28.6Mm seat tubes
Gusset Bachelor Chain Tensioner
$25.95
- Bargain priced tensioner for turning a geared bike into a single speed - Fixed position aluminum arm with quiet rubber sealed bearing pulley - Mounts in place of derailleur
Gusset Squire Chain Tensioner
$39.95
- Lightweight sprung-type chain tensioner replaces derailleur for running a 1-Speed drivetrain on a vertical dropout frame - Variable tension and position (Can be used on rigid frames or suspension frames with varying chain length) - Supplied with 2 springs to provide pull-Up or push-down function - Superlight CNC machined alloy body, pivot bolt and sealed bearing pulley - Steel no-jump guide cage
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Cross Double XL Chain Catcher
$69.99
The Cross Double XL clamps independent of the front derailleur and is the long reach version of our popular cross double chain catcher. The adjustable cross XL foot mounts to its own CNC sculpted lightweight clamp. - Material: 6061 T6 CNC machined Aluminum - Fitment: All frames with a round mounting area - Clamp Sizes: 31.8mm, 34.9mm - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Cross Single XL Chain Catcher
$69.99
The Cross Single XL Chain Catcher coupled with a K-Edge Ring Guard is the ultimate lightweight set-up for a single ring cyclocross set-up. The adjustable cross XL foot mounts to its own CNC sculpted lightweight clamp and adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Material: 6061 T6 CNC machined Aluminum - Fitment: All frames with a round mounting area - Clamp Sizes: 31.8mm, 34.9mm - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
MRP Decapitator Direct Mount Cover
$29.95
- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA
MRP Mini G2 SL Backplate
$73.50
- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP
Microshift Marvo LT Front Derailleur
$25.99
Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter
Microshift R539 Front Derailleur
$25.99
Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings
Microshift ADVENT 9-Speed Front Derailleur
$26.99
When your riding gets adventurous, more range means more versatility. With the ADVENT front derailleur, you can run a gravel-style 46-30T crank paired with an 11-42 cassette, resulting in a ridiculous 585% gear range. Will that work best for traditional touring, gravel, adventure racing, or bikepacking? The answer is yes. - Top Gear Teeth: 44-48T - Capacity: 16T - Band Clamp: 34.9mm (31.8mm w/Shim) - Chain Line: 48.8mm / Boost 51.8mm - Chainstay Angle: 63-68
SRAM Direct Mount Derailleur Cover
$16.00
• Covers the unused high-mount front derailleur mount on 1x-equipped bikes • Black anodized aluminum
SRAM X4 7-/8-Speed Rear Derailleur
$26.99
SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
SRAM Chain Spotter
$30.00
SRAM's Chain Spotter fits on your seat tube beneath your front derailleur to keep the chain from coming off, which keeps you riding and prevents chain and frame damage, too. It's made of lightweight aluminum and includes all mounting hardware. Just bolt it on and go. No front derailleur fine-tuning needed.
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Top-pull)
$36.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and their GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Derailleur capacity: 14-tooth
SRAM GX 2x10 Front Derailleur (Low-clamp, Dual-pull)
$37.00 - $39.00
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (High Direct-mount, Top-pull)
$39.00
SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low-clamp, Top-pull)
$40.00
SRAM's low-profile GX 2x11 front derailleur was designed specifically around SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 150 grams
SRAM Apex Braze-On Front Derailleur
$49.99
For smooth downshifts and fast upshifts, SRAM's Apex Front Derailleur is engineered for success. Its aluminum body is light as a feather while its steel cage is stiff for precision shifts everytime. The Apex Front Derailleur shifts great on standard and compact cranksets, too.
SRAM X9 2x10 Front Derailleur (High-clamp, Bottom-pull)
$50.00
SRAM's X9 Front Derailleur sports a stiff steel cage and a cutout design for exceptional durability with minimal weight. It provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM Force 22 Front Derailleur
$54.00
SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.
SRAM X5 9-Speed Rear Derailleur
$54.99
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM Apex Rear Derailleur (Short-cage)
$57.00
SRAM's Apex Rear Derailleur features cold-forged aluminum construction for sweet shifting, dependability and low weight. Designed for SRAM's 10-speed road drivetrains and featuring their Exact Actuation Technology, Apex will provide you with perfect shifting every time.
SRAM Rival 22 Rear Derailleur (Short Cage)
$57.00
Incredibly fast, astonishingly quiet, and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 180 grams.
SRAM Rival Clamp-On Front Derailleur
$64.99
For unrivaled shifting, upgrade to SRAM's Rival Front Derailleur. Because consistency equals victory, Rival boasts lightweight and durable cold-forged-aluminum construction plus SRAM's Exact Actuation Technology for awesome shifting every time. The Rival shifts beautifully on standard and compact cranksets, too.
SRAM Force Clamp-On Front Derailleur
$65.00
SRAM's Force Front Derailleur is made of light, yet rugged materials to shift like a champ mile after mile. It also lets you trim your shifting for flawless gear changes and it boasts easily accessed limit screws for simple adjustments. Plus, the Force shifts perfectly with both standard and compact cranksets.
Page 1 of 4 Next page