Parts & Accessories

$9.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

$9.00
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.

$9.50
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick

$9.95
- Replacement pawls and spring kit for Spin Doctor Pro hubs
- Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible
- DJD and DJD-BD parts are generally not cross compatible

$9.95
- High performance adhesive tape, a great pairing with Velox Cement
- Each roll is usually adequate for gluing two tubular tires
- Protects tube from spoke/nipple/rim puncture

$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel

$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel

$9.99 - $14.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable

$10.00
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease.
- Fits left side of Alfine SG-S700 hubs

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle

$10.25
The kit contains 3 pawls and 3 springs. Compatible with all Stan's Hubs. Very durable and with normal uses will last the life of the hub.

$10.40
Replacement nipples for installing spokes on ENVE carbon fiber cycling wheels. Rim, spoke, and hub won’t stay together on their own. These are the only nipples you should use on our wheels.
- Material: Brass
- ENVE nipples are required in order to keep your wheel warranty valid

$11.00
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.

$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$11.50
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick

$11.90
SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments.
- Material: Ultra Thin Polyamide
- Width: 25mm or 30mm
- Features: high temperature range adhesive, ideal for complex rim profile
Installation:
- Affix tape all the way around on the right side snug against the bead hook
- Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes
- Use a red-hot awl or similar to pierce the valve hole

$13.00
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock.
- Improves tension consistency and overall build quality
- Prevents spoke wind up
- Offers secure thread lock between spoke and nipple
- Prevents corrosion between spoke and nipple
- Can be used dry or as a slurry
- Works great with mechanically locking nipples

$13.90
- Replacement drivers for Original DJD or DJD-Bush Drive rear hub
- Need DJD Bush Drive removal tool (sold separately)

$13.90
- Replacement drive ring for Spin Doctor Pro rear hub
- Requires drive ring removal tool (sold separately)

$13.90
- Green colored spoke prep remains pliable for adjustments
- Helps keep spoke nipples from loosening

$13.95
- 14 gauge forged 7075 alloy with CNC finish
- Matches Halo and Gusset anodized colors perfectly
- Sold in bags of 50
- length: 12mm

$13.95
- Precision CNC machined 6061 aluminum axle nuts
- Compare stock steel nuts at 44 grams versus alloy nuts at 16 grams

$13.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock.
- Alfine hubs are packaged without small parts and require this kit plus a cog
- Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit
- For 11-Speed Hub
- Includes CJ-S700 Cassette Joint for Vertical Dropouts
*Cassette joint does not fit Di2 Alfine hubs

$14.95 - $25.95
- Replacement pawls and springs for DJD Bush Drive rear are for original DJD or DJD-Bush Drive rear hub
- Replacement pawls and springs for Spin Doctor 6-Drive are compatible with all 6-Drive hubs
- Replacement pawls and springs for Supa Drive are compatible with all Supa Drive hubs
- Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible
- DJD and DJD-BD parts are generally not cross compatible